Today, in various urban and industrial areas, you can find traces of metal reservoirs that are placed on the ground of different dimensions and shapes, or placed at a height above the ground using metal or concrete bases.
There are different uses for metal reservoirs, one of which is to use as a water storage or transfer reservoir.
All types of water can be stored in these metal reservoirs and used for the intended purpose. Because water is supplied from different sources or enters the reservoir after a process, the mentioned water can become alkaline and acidic. By changing the acidity of water, its corrosive power and destruction also increase and destruct the body and especially the boiling points of the reservoirs.
With the increase in the service time of the metal reservoir, water gradually infiltrates the inner surface of the reservoir and further leads to the creation of cracks with holes in the reservoir, which results in the wastage of water inside the reservoir.
In the welding lines of metal water reservoirs, usually very small holes are created during reservoir welding, which are very susceptible to water penetration into the thickness of the weld and ultimately destroying it.
In addition to the above, which has a very destructive effect on the life of the metal water reservoir, weathering, which causes the metal to rust, also harms the serviceability of the reservoir and greatly reduces the thickness of the reservoir.
Another cause of corrosion in metal water reservoirs is the increase in the temperature of the water inside the reservoir, which results from various causes such as sunlight and chemical activities. The increase in water temperature causes steam in the reservoir, and steam is much more corrosive than water and increases the rate of corrosion.
Farasath Zarfam Company, which specializes in anti-corrosion composite coatings, knowing the main reasons for the corrosion of metal reservoirs, provides services in the coating of metal water reservoirs using composite materials to strengthen the structure of the reservoir and prevent its corrosion.
The latest way to deal with metal corrosion, which is the use of composite materials and coatings to be used in the strengthening of metal water reservoirs, requires a special design, which Farasath Zarfam Company can offer composite materials suitable for the type of water (drinking, sea, acidic and alkaline, etc.) by creating a laboratory of composite coatings for various purposes. In the design and implementation of the composite coating of metal reservoirs, it is very important to pay attention to points such as the difference in thermal coefficients, water penetration, and the resistance of the polymer base against the aqueous chemical environment, and Farasath Zarfam Company considers all the mentioned items as important details of a suitable and standard design.
Relying on the experience and knowledge gained over the years, Farasath Zarfam Company has proven its ability to strengthen and repair metal water reservoirs and is ready to provide advice, design and implementation of such composite coatings to protect the assets of its dear clients.
