The industries that are producing fluids need their storage places to store and transport said fluids. Metal reservoirs are usually used for this purpose.
The reason for choosing the metal reservoir is that it has excellent plasticity and also the raw materials for its construction are also available.
But as it is known, if the fluids inside the reservoir are corrosive, i.e. the fluid is acidic or alkaline, with the passage of time, the internal surface of the metal will suffer from defects and corrosion.
Many researches that have been done so far have proven that metal is not suitable for storing acid and base, but the costs of building a reservoir with dipper materials and the inability to provide the extraordinary mechanical strength of metal by other materials have led to it, which still make the metal reservoirs popular and be used abundantly in the chemical industry.
As mentioned, the proximity of acid and base causes corrosion. The increase in the depth of corrosion has caused the creation of holes or cracks in the body of the reservoirs, which causes the fluid inside the reservoir to flow out and destroy the environment around the reservoir.
It should also be mentioned that the flowing fluid penetrates deep into the ground and pollutes the subsurface water, which has destructive effects on the environment.
The above ends with the question of whether there is a way to prevent the mentioned failures and increase the service life of metal reservoirs.
The answer to the above question lies in the use of the composite coatings of Farasath Zarfam Company, which significantly solves the above issues and increases the life of the reservoir itself. In addition, the Farasath Zarfam Company has been able to produce reservoirs that are prepared from a combination of composite materials and metal, which is a very suitable reservoir with a long life against acid and base.
Due to the use of composite coating before the operation of the reservoir and during the construction phase, acid and base corrosive fluids practically never penetrate the metal, and this action makes use of a very high service life of the reservoir. The other part of the reservoirs that have been corroded by acid and base can be easily protected at a reasonable cost against further corrosion and restored the lost mechanical strength to the reservoir.
The composite coating of Farasath Zarfam Company, which is designed according to the state-of-the-art standards in this field, can protect reservoirs from corrosion for years against the acidity of different fluids that are in the range of 13>PH>2. Of course, by reducing the corrosion of acid and alkaline reservoirs, the staggering costs of their repairs and maintenance are also reduced to a negligible amount, which leads to a reduction in production overhead costs.
Farasath Zarfam Company has a brilliant record in the field of internal coating and roof of metal reservoirs that contain alkaline and acidic fluids and has completed numerous projects.
In addition to the composite coating of reservoirs, this company has started to design, manufacture and operate composite metal reservoirs and announces its readiness to consult and carry out the projects of respected employers in various industries.
